Belshaw Adamatic Bakery Group
•
www.belshaw-adamatic.com
•
206-322-5474
•
6
MN-1012EN
Donut Robot Mark II / Mark V OM
2
Operation
Figure 1.2, Temperature controller
IMPORTANT
To unpack and install your Donut Robot®, follow the installation instructions in the Technical
Supplement to this manual.
CAUTION
Read this section completely before operating the machine!
Operating Controls
1.
Ensure that the Donut Robot has been
connected to correct power source.
2.
Ensure the fryer is filled with shortening.
If there is no shortening in the fryer, see
the section below, “Inserting Shortening”.
3.
Turn on the main circuit breaker on the
back of the heater head (
POWER
LIGHT
will turn on).
4.
Turn on the
FRYER HEAT
switch
(the temperature controller will turn on).
5.
Set the
TEMPERATURE
CONTROL
to the target frying
temperature (See Figure 1.2)
(
TEMPERATURE CONTROL
light
will turn on when fryer is heating).
6.
Set
FRYER CONVEYOR
switch to
AUTO
(the conveyor will start
automatically when the target
temperature is reached).
1
2
2
3
