Belshaw Adamatic Bakery Group
•
www.belshaw-adamatic.com
•
206-322-5474
•
18
MN-1012EN
Donut Robot Mark II / Mark V TS
THE MOTOR OVERHEATS.
Possible Causes
What To Do
The power requirements of the machine do not
match the power source.
Supply the correct power as specified on the data
plate.
WARNING
To avoid being burned, electrocuted, or otherwise
injured, before doing the following, turn off the
machine, allow the shortening to cool, and
disconnect the machine from the power source.
The motor is binding.
Repair or replace the motor.
The motor is defective.
Repair or replace the motor.
THE DEPOSITOR CUTS DOUBLE WHEN YOU HAVE SELECTED ONE CUT
PER POCKET.
Possible Causes
What To Do
WARNING
To avoid being burned, electrocuted, or otherwise
injured, before doing any of the following, turn
off the machine, allow the shortening to cool, and
disconnect the machine from the power source.
The nylon brake dog is binding on the depositor
brake motor.
Loosen the brake dog. If the spring is missing or
weak, replace it. If the brake dog is worn, replace it.
An internal wire is interfering with the nylon
brake dog.
Move the wire.
The arm on the depositor microswitch is bent.
Bend the arm back into position or replace the
microswitch.
The wires on the depositor microswitch are
reversed.
Make the correct connections.
