Belshaw Adamatic Bakery Group
•
www.belshaw-adamatic.com
•
206-322-5474
•
16
MN-1012EN
Donut Robot Mark II / Mark V TS
THE DONUTS DROP AT THE WRONG TIME.
Possible Cause
What To Do
The hopper swing is adjusted incorrectly.
WARNING
To avoid injury, turn off the machine.
Adjust the hopper swing. See “Adjusting the
Hopper” in the “Installation” section.
THE HEATING ELEMENT FAILS TO MAINTAIN THE PROPER
TEMPERATURE.
Possible Causes
What To Do
The input voltage is incorrect.
Supply the correct power as specified on the data
plate.
Sediment has accumulated around the
thermostat bulb.
WARNING
To avoid being burned or otherwise injured, turn
off the machine and allow the shortening to cool.
Clean to remove the sediment. (Clean the Donut
Robot regularly and thoroughly.)
The thermostat has been calibrated incorrectly.
Recalibrate the thermostat.
The thermostat is defective.
WARNING
To avoid being burned, electrocuted, or otherwise
injured, turn off the machine, allow the
shortening to cool, and disconnect the machine
from the power source.
Replace the thermostat.
