BELL HELICOPTER 222, Maintenance Manual

Page: 75 / 198

BHT-222/222B-MM-1
5-00-00
9 SEP 2011 Rev. 7 Page 57 ECCN EAR99
SCHEDULED INSPECTIONS
5-22. PROGRESSIVE INSPECTION — EVENT 7
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _________________________
GENERAL
Paragraph 5-13 1. Perform a complete 50-hour inspection.
DETAIL
NOTE
Examine inspection window(s) and/or glass(es) for
cracking and discoloration. If either of these
conditions are present, the part must be removed
and replaced prior to returning helicopter for service.
Chapter 26 1. Inspect right and left engine fire bottles for proper pressure
indication. F3/F4
Chapter 27
Chapter 29 2. Remove access panel from bottom of aft fuselage and
inspect bellcrank and directional control hydraulic actuator
supports for corrosion and mechanical damage. Inspect
actuator for hydraulic leakage, bearing wear, and security of
attachment. F3/F4
Chapter 66 3. Remove the left aft fairing assembly and inspect the
forward tail rotor driveshaft hanger assembly for security of
attachment, cracks at mounting ears, and corrosion or
mechanical damage. Check bearing for evidence of grease seal
leakage and discoloration caused by overheating. E1