Belden 934 879-009 Manual Download Page 80

Page: 80 / 98

8.2 Configuration page (Config)

8 Integrated web server

8.2 Configuration page (Config)

When the

Config

menu item in the Web server menu bar is selected, the

Configuration page opens. Network parameters such as the IP address can

be configured here and the LioN-P module reset to factory settings. Executed

actions must be confirmed using the

Submit

Apply

button.

Attention:

Please note that if you reset the modules to the factory

settings, the EtherNet/IP name and IP address are also reset to the

default values. It may not be possible to access the web server of the

modules and exchange data in the EtherNet/IP network after the reset.

If the firmware of the LioN-P module is updated, this can be done using the

Firmware Update

button. Select the corresponding ZIP file and conform the

procedure with the

Upload

button.

Do not interrupt the update procedure. Once the firmware update is

completed you are prompted to restart the LioN-P module.

Manual LioN-P EtherNet/IP

Version 2.0 11/2017

Summary of Contents for 934 879-009



































































































Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands

Belden 934 879-009, Manual

Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands