Belden 934 879-009 Manual Download Page 45

Page: 45 / 98

5 Configuration and startup

5.4 Configuration of the LioN-P

EtherNet/IP modules

An activation of QuickConnect does not necessarily have to be done through

the configuration assembly instance. Alternatively, this can also be done

at runtime with the TCP/IP interface object (CIP Class ID

0xF5

, attribute

12(0x0C)

, value

). In RSLogix 5000, you use a message command to do this.

Please note that changing this configuration requires a restart of the LioN-P

module.

5.4.2.4 General settings configuration

The display of these general parameters depends on the LioN-P module

used. Different parameters can be configured. Each bit in this bit field

represents the state of a parameter.
The following options are available to use for each parameter:

Disabled (0)

Parameter disabled

Enabled (1)

Parameter enabled

Manual LioN-P EtherNet/IP

Version 2.0 11/2017

Summary of Contents for 934 879-009



































































































Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands

Belden 934 879-009, Manual

Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands