H2AIR
®
ARCH
1MANUL958
Belanger®, Inc. *PO BOX 5470 *Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
23
Installation
Tunnel Placement
7) Position the outside edge of the passenger side foot plate on the marked line, 139-
½” from the
outside edge of the driver side foot plate, as shown below.
8) Confirm that the driver side and passenger side foot plates are square to each other by taking two
measurements and confirming that they are equal to one another:
Measure from the exit end of the driver side foot plate to the entrance end of the
passenger side foot plate.
Measure from the entrance end of the driver side foot plate to the exit end of the
passenger side foot plate.
9) Measure from the floor to the tip of the DryLite
™ Dryer Nozzles, as shown in the image above.
This measurement should be 90-1/4
”, shims or plates may be used if necessary to achieve the
appropriate height.
139-1/2”
Driver Side
Passenger Side
90-1/4”
Height
Clearance
Outside Edge of
Passenger Side
Foot Plate
View of the ENTRANCE side of the H2AIR®
Arch
facithe ENTRANCE side
Floor Line
Outside edge of
Driver Side Foot
Plate
