53
7. The following screen will then be displayed.
8. Through the
MENU
key, select the activation or not of the acoustic signal when the weight
is within the two set limits. Then confirm the selection by pressing the
ENTER
button.
9. If the thresholds have been inserted correctly, the balance will return to weighing mode
with an indication of the threshold status (
+
MAX threshold,
-
MIN threshold,
OK
within the
two limits sets).
NOTE: If the values have not been set correctly, the word ERROR 07 will be displayed.
The thresholds function has three operating modes.
11.4.1 With both the limits set
This mode allows to identify an acceptance range, inserting a lower limit and an upper limit, in
which the value of weight is considered ok, identified by the “OK” symbol that is visualized on
the display together with the acoustic signal, if activated. When the weight is under the value
of the lower limit set, the symbol “L” is visualized on display, while if the value is over the
upper limit set, the symbol “H” is visualized on display.
11.4.2 With only the lower limit set
When only the lower limit is set and the upper limit is left to zero, the weight is considered ok each time
the value of weight is over the lower limit set, identified by the “OK” symbol that is visualized on the
display together with the acoustic signal, if activated. When the weight is under the value of the lower
limit set, the symbol “L” is visualized on display.
11.4.3 With only the upper limit set
When only the upper limit is set and the lower limit is left to zero, the weight is considered ok each time
the value of weight is under the upper li
mit set, identified by the “OK” symbol that is visualized on the
display together with the acoustic signal, if activated. When the weight is over the value of the upper limit
set, the symbol “H” is visualized on display.
Thresholds
01-06-10 13:15:24
Off
Select the buzzer
0.0000
g
Thresholds
01-06-10 13:15:24
+
OK
-
