51
7. Press the
button again to begin weighing the various components.If necessary,
carry out the tare operation before measuring out the quantity of component indicated at
the top right of the display
To facilitate the dosing operation, when the value of the component is approaching the
threshold of the acceptable value, the dosing bar will automatically zoom.
8. Then press the
button to pass to the next component.
9. If necessary, carry out the tare operation before measuring out the quantity of component
indicated at the top right of the display.
10. Then press the
button to pass to the next component.
11. Repeat the procedure until the last component, after which the weights of the single
components measured and the total weight will be printed if the instrument is equipped
with a printer. The display will show the following screen:
12. To exit from the screen and carry out a new formulation, press the
ON/OFF
button once.
To exit from the program and return to the weighing screen, press the
ON/OFF
button two
consecutive times.
To interrupt and exit from the formulation function at any time, press the ON/OFF button.
Formulation
01-06-10 13:15:24
END
TOT: 20.0000 g W
: 5.0000g
TOT: 0.0000 g W
: 0 .0000g
(-)
Formulation
01-06-10 13:15:24
01-Flour
E premere ‘ Print’
10.0000g
- 1.0 % + 2.0 %
E premere ‘ Print’
Formulation
01-06-10 13:15:24
02-Butter
E premere ‘ Print’
5 .0000g
- 1.0 % + 2.0 %
E premere ‘ Print’
(-)
TOT: 10.0000 g W
: 0 .0000g
(-) means that weight is under the value
(+)
means that weight is over the value
OK means that weight is inside values
