manualshive.com logo in svg

Beckhoff TF6120, Manual

Share
Download
Beckhoff TF6120 Manual Download Page 9

Installation

TF6120

9

Version: 1.1

3

Installation

3.1

System requirements

The following chapter lists the system requirements.

The TS6120 supplement or the TF6120 function is no longer being further developed and is there-
fore not released for newer operating systems. The so-called UA Gateway in the product TS6100/
TF6100 OPC UA is available to you as a free OPC DA interface:

https://infosys.beckhoff.com/content/1033/tf6100_tc3_opcua/9007200762490123.html

OPC DA Server

• Operating systems:

• Windows XP Pro SP3

• Windows Server 2008 R2

• Windows Server 2012

• TwinCAT:

• TwinCAT 3 XAE Build 3100 (or higher)

• TwinCAT 3 XAR Build 3100 (or higher)

OPC XML DA Server

• Operating systems:

• Windows XP Pro SP3

• TwinCAT:

• TwinCAT 3 XAE Build 3100 (or higher)

• TwinCAT 3 XAR Build 3100 (or higher)

• Other:

• Internet Information Services 5.1, 6.0, 7.0 and 7.5

3.2

Installation

The following section describes how to install the TwinCAT 3 Function for Windows-based operating
systems.

ü

The TwinCAT 3 Function setup file was downloaded from the Beckhoff website.

1. Run the setup file as administrator. To do this, select the command 

Run as administrator

 in the context

menu of the file.

ð

The installation dialog opens.

Summary of Contents for TF6120













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands