manualshive.com logo in svg

Beckhoff TF6120, Manual

Share
Download
Beckhoff TF6120 Manual Download Page 46

Configuration

TF6120

46

Version: 1.1

Signal Type

Beschreibung

0 : ReadCount

1 : WriteCount

2 : Random

Random-Function

3 : Ramp

Ramp-Function

4 : Sine

Sinus-Function

5 : Square

Square-Function

6 : Triangle

Triangle-Function

7 : Stepp

Step-Function

Disable

Deactivates the simulation

Save the configuration via "File" --> "Save As". After the configuration has been saved, you will be asked if
this configuration should be set as the startup-configuration.

The configuration will be automatically activated on next restart of the OPC-Server.

Step 2: Configuration of PLC-Variables for OPC-Simulation

With previous steps we defined a "simulation-template" with detailed information about simulation handling.
Now we define, which PLC variable should be handled with simulation. Similar to the Data Access feature,
this configuration also occurs by adding comments to the PLC-project.

Beispiel: 

Please note:

Today just global PLC-variables can be linked to simulation-templates. Elements of structures or arrays can
not be configured as an OPC-Simulation.

Summary of Contents for TF6120













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands