Beckhoff EP8309-1022, Documentation

Page: 81 / 116

Commissioning and Configuration
EP8309-1022 81 Version: 2.0.0
Index 8000 AI Settings Ch.2
Index (hex) Name Meaning Data type Flags Default
8010:0 AI Settings Maximum subindex UINT8 RO 0x18 (24
dec
)
8010:01 Enable user scale 1 User scale is active. BOOLEAN RW 0x00 (0
dec
)
8010:02 Presentation 0 Signed presentation BIT3 RW 0x00 (0
dec
)
1 Unsigned presentation
2 Absolute value with MSB as sign (signed amount
representation)
8010:06 Enable filter 1 Enable filter, which makes PLC-cycle-synchro-
nous data exchange unnecessary BOOLEAN RW 0x00 (0
dec
)
8010:07 Enable limit 1 1 Limit 1 enabled BOOLEAN RW 0x00 (0
dec
)
8010:08 Enable limit 2 1 Limit 2 enabled BOOLEAN RW 0x00 (0
dec
)
8010:0A Enable user calibra-
tion 1 Enabling of the user calibration BOOLEAN RW 0x00 (0
dec
)
8010:0B Enable vendor cali-
bration 1 Enabling of the vendor calibration BOOLEAN RW 0x01 (1
dec
)
8010:11 User scale offset User scale offset INT16 RW 0x0000 (0
dec
)
8010:12 User scale gain User scale gain.
The gain is represented in fixed-point format, with the
factor 2
-16
.
The value 1 corresponds to 65535
dez
(0x00010000
hex
)
and is limited to +/- 0x7FFFF
INT32 RW 0x00010000
(65536
dec
)
8010:13 Limit 1 First limit value for setting the status bits INT16 RW 0x0000 (0
dec
)
8010:14 Limit 2 Second limit value for setting the status bits INT16 RW 0x0000 (0
dec
)
8010:15 Filter settings This object determines the digital filter settings for all
channels of the module , if it is activated via Enable filter
(index 0x80n0:06 [
}
80] ). The possible settings are se-
quentially numbered.
UINT16 RW 0x0000 (0
dec
)
0 50 Hz FIR
1 60 Hz FIR
2 IIR 1
3 IIR 2
4 IIR 3
5 IIR 4
6 IIR 5
7 IIR 6
8 IIR 7
9 IIR 8
8010:17 User calibration offset User calibration: Offset INT16 RW 0x0000 (0
dec
)
8010:18 User calibration gain User calibration: Gain INT16 RW 0x4000
(16384
dec
)
Index 8020 TACHO Settings Dual Shaft Mode Ch.1
Index (hex) Name Meaning Data type Flags Default
8020:0 TACHO Settings Dual
Shaft Mode Ch.1 UINT8 RO 0x15 (21
dec
)
8020:11 No. of Targets Number of "cams" on the shaft/axis UINT16 RW 0x0001 (1
dec
)
8020:12 Input Signal Timeout The process record <Speed Below Threshold> is set af-
ter x msec without signal change at the input. UINT16 RW 0x0064
(100
dec
)
8020:15 Presentation Display of the measured value in RPM, Hz, … UINT16 RW 0x0001 (1
dec
)
Index 8030 TACHO Settings Dual Shaft Mode Ch.2
Index (hex) Name Meaning Data type Flags Default
8030:0 TACHO Settings Dual
Shaft Mode Ch.2 UINT8 RO 0x15 (21
dec
)
8030:11 No. of Targets Number of "cams" on the shaft/axis UINT16 RW 0x0001 (1
dec
)
8030:12 Input Signal Timeout The process record <Speed Below Threshold> is set af-
ter x msec without signal change at the input. UINT16 RW 0x0064
(100
dec
)
8030:15 Presentation Display of the measured value in RPM, Hz, … UINT16 RW 0x0001 (1
dec
)