Product Overview
EP8309-1022
16
Version: 2.0.0
The figure
Operation at load with inadequate inductance (virtually ohmic)
illustrates operation with an
inadequate inductance. Continuous current flow is not reached. The current has "gaps". This mode of
operation is not permitted.
Note
Pulse width current terminals require inductive loads
The load inductance should have a minimum inductance of 1 mH. Operation of the pulse
width current terminals at loads with an inductance of less than 1 mH is not recommended,
since the intermittent current flow prevents reference between the set value and the arith-
metic mean of the current.
2.6
Influencing of the PWMi output value by the
parameters
Fig. 7: Influencing of the PWMi output value
