Becker ACTIVE 45 Page 24 Operating Manual Download

Page: 24 / 146

>>>

GENERAL OPERATION

> D

> GB

> F

> I

> PL

Adjusting the unit holder’s position

Loosen the fastening screws

and

until the carrier plate

can be

moved without using excessive force.

Move the carrier plate

to the

required position and hold it in this
position.

Tighten the fastening screws

and

sufficiently so that the Navigation

device is held securely in place when
the vehicle is in motion.

Attaching the Navigation device

Position the Navigation device with the
attachment point on the bottom of the
housing, onto the carrier plate

Without using excessive force, press
the Navigation device onto the carrier
plate

. The Navigation device locks

into place.

Removing the Navigation device

Press the button

on the top of the

carrier plate

. This unlocks the

Navigation device which can be removed
from the carrier plate.

Switching the Navigation device
on/off

You can switch the device on, off or set it
to sleep mode using the ON/OFF switch.

Switching on

Press the button on the top of the
Navigation device.

The unit is switched on. The
manufacturer's logo appears on the
touchscreen.

When the Navigation device is started for
the first time, the language selection is
displayed automatically.

Using the

buttons or the scroll

wheel, it is possible to scroll through the
list in the direction of the relevant arrow.

Summary of Contents for ACTIVE 45



















































































































































Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands

Becker ACTIVE 45, Operating Manual

Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands