manualshive.com logo in svg

Becker ACTIVE 45, Operating Manual, Page: 120 / 146

Share
Download
Becker ACTIVE 45 Operating Manual Download Page 120

119

TOOLS

>>>

> D

> GB

> F

> I

> PL

Tools

Under Tools, the following functions are
grouped together, depending on the
model:
• Marco  Polo  City  Guides

• Image viewer

• Country information

• Overview  of  functions

• Blocking a section of the road

• Trip computer
The  Tools  menu  is  called  up  from  the
main menu.

>

In the main menu, press 

Extras

.

This displays the extras menu.

>

Select the desired function by pressing
one of the buttons.

Marco Polo City Guides

With the travel guide, you can select, for
example, MARCO POLO Top-Highlights
or MARCO POLO Insider Tips and start
the guide destination there. See "Marco
Polo City Guides" on page 56.

Image viewer*

The Image Viewer can display pictures
saved on an inserted micro SD memory
card or on the internal memory.
The jpg and bmp image formats are
supported.

>

Press the 

Pictures

 button.

Note:

The image viewer cannot be called up
when route guidance is active.

*depending on model, this must be activated via the Content Manager.

Summary of Contents for ACTIVE 45



















































































































































Reviews:

No comments