Becker ACTIVE 45 Page 121 Operating Manual Download

Page: 121 / 146

120

>>>

TOOLS

> D

> GB

> F

> I

> PL

A message is displayed stating that the
image viewer must not be used when
driving. Please observe this warning.

Confirm the message by pressing the

button.

The image viewer menu appears.

The image viewer menu

In the image viewer menu, you can
select images, start a slide show and call
up the settings.

Folder containing images
Thumbnails of the images in the
current folder
View the previous page of images/
folders
Go up one level in the directory
hierarchy
View the next page of images/
folders

Selecting an image

In the image viewer menu, select the
desired folder, and then the desired
image.

You can use the

and

buttons to

scroll through the pages of images and
folders.
The selected image is displayed along
with an image menu.

You can use the menu buttons to rotate
or enlarge the image or to display
information.

Summary of Contents for ACTIVE 45



















































































































































Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands

Becker ACTIVE 45, Operating Manual

Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands