Becker ACTIVE 45 Page 17 Operating Manual Download | Manualshive

Page: 17 / 146

background image

17

GENERAL OPERATION

>>>

> D

> GB

> F

> I

> PL

General operation

Maintenance and care

The unit is maintenance-free.
For proper care, a commercially
available cleansing fluid for electrical
devices may be applied using a soft
damp cloth.

Your mobile navigation system was
designed and manufactured with great
care and should be treated with equal
care. You will enjoy your mobile naviga-
tion system for a long time to come if you
observe the recommendations listed in
the following:

• Protect your mobile navigation unit

and the accessories from water and
moisture. If your unit has been
exposed to moisture, switch it off
immediately and disconnect the power
supply. Allow to dry at room
temperature.

• Do not operate your mobile navigation

system in a dusty or dirty environment
and do not store it in such an
environment.

• Do not store your mobile navigation

system in hot environments. High
temperatures can shorten the service
life of electronic components in your
unit, damage the rechargeable
batteries and cause certain plastics to
warp or melt.

• Do not store your mobile navigation

system in cold environments. During
operation, when the unit warms up to
operating temperature, moisture may
form internally, causing damage to
electronic components.

• Do not drop your mobile navigation

system unit, protect it from shocks and
do not shake it. Improper handling can
damage components within the unit.

• Never use corrosive or aggressive

chemicals, cleaning solutions or
aggressive detergents for cleaning.

All the above information applies equally
to the mobile navigation system, the
rechargeable battery, the mains charg-
ing and car power adapters as well as all
accessories. Should one of these parts
not work properly, please contact your
authorised dealer.

¤

Danger!

Danger to life by electrocution.
Always switch off the unit and
disconnect the mains power supply
unit before cleaning the unit, supplied
components, or accessories.

Note:

Do not use any aggressive or abrasive
substances or cloths which may
damage the surface.
The unit must not be exposed to water.

«
...
15
16
17
18
19
...
»

Summary of Contents for ACTIVE 45



















































































































































Reviews:

No comments

Related manuals for ACTIVE 45

Brand: J. W. Davis & Company Pages: 68

Brand: Laird Pages: 19

StarFinder Aire

Brand: Laipac Pages: 18

Brand: ZENEC Pages: 36

Brand: ZENEC Pages: 11

Brand: GPT Pages: 7

Brand: Camoplast Pages: 24

Brand: Navman Pages: 2

Brand: Camoplast Pages: 23

Brand: Suunto Pages: 9

Brand: Tektronix Pages: 482

Brand: Garmin Pages: 2

Brand: Garmin Pages: 60

Brand: Raymarine Pages: 58

Brand: Dogtra Pages: 38

Brand: Kingwo Pages: 18

Brand: YOYOMOTION Pages: 2

Brand: SQUANTO Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands