Becker ACTIVE 45 Page 77 Operating Manual Download

Page: 77 / 146

NAVIGATION MODE

>>>

> D

> GB

> F

> I

> PL

Setting the Voice

In the

Voice

settings window you can set

the voice that will make the navigation
announcements for the language that
has been set.

In the

Voice guidance

settings

window, press the

Voice

button.

The

Voice

settings window appears.

Select the desired voice.

A short example announcement is given.

Confirm your selection by pressing the

button.

Setting the Volume

With the

Volume

settings window, you

can set the standard volume for voice
announcements for each start of the
Navigation device, or switch off voice
announcements completely. Depending
on the situation, this setting can be fitted
into the map display.

In the

Voice guidance

settings

window, press the

Volume

button.

The

Volume

settings window appears.

Select the desired volume with the

and

buttons or the scroll

wheel.

The voice output can be switched off
completely or turned back on by
pressing the Mute button.

Confirm your settings by pressing the

button.

The Warnings button

In the

Warnings

settings window you can

select which warnings are to be
displayed by the Navigation device or
which warning sounds are to be output.

In the settings menu, press the

Warnings

button.

The

Warnings

settings window appears.

The following setting options are then
available:

Note:

Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).

Summary of Contents for ACTIVE 45



















































































































































Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands

Becker ACTIVE 45, Operating Manual

Search results

Summary of Contents for ACTIVE 45

Reviews:

Related manuals for ACTIVE 45

Brands by name

Popular brands