Installing the Model 5782 VNR
119557-A Rev. 00
2-5
To install the flash memory card:
1.
Place the Model 5782 VNR on a grounded antistatic mat with the
components facing up.
2.
Position the card with the label facing up (
Figure 2-2
) and the INSERT
arrow pointing toward the card receptacle.
3.
Insert the card into the receptacle, and gently push the card until it fits
snugly into place.
Figure 2-2.
Inserting the Flash Memory Card into the Model 5782 VNR
Note:
If you install a new flash memory card that you did not obtain from Bay
Networks, you must format the card before writing to it. You can format the
card using Site Manager or the Technician Interface
format
command. (See
Using Technician Interface Software for instructions.)
6501.1
