5-17
Chapter 5 Configuration Examples
Installing Remote Annex Network Software for Windows
3.
Type the name of the Annex or its IP address in the Annex Name
box.
4.
Change the Community String, Timeout and Retries settings if
necessary.
5.
Click on OK.
After it closes the dialog box, Quick2Config Annex establishes an
SNMP link to the Annex, determines the Annex model type and
reads the currently set Annex parameters. Quick2Config Annex adds
an icon for the Annex to the tree view and identifies the unit by name
and model number (
Figure 5-15
).
Figure 5-15. Annex Icon and RA6300 Name
6.
Click on the plus sign button to the left of the Annex icon to
display the current channel configurations.
Quick2Config Annex expands the display and makes the PRI
channels available for selection (
Figure 5-16
).
Summary of Contents for 5391
Page 1: ...Part No 166 024 634 Rev A January 1997 Installing Remote Annex Network Software for Windows ...
Page 6: ...Installing Remote Annex Network Software for Windows Contents vi ...
Page 10: ...Installing Remote Annex Network Software for Windows Tables x ...
Page 14: ...Installing Remote Annex Network Software for Windows Preface xiv ...