manualshive.com logo in svg

Bay Networks 5391, Installation Manual, Page: 16 / 114

Share
Download
Bay Networks 5391 Installation Manual Download Page 16

Installing Remote Annex Network Software for Windows

Chapter 1    Overview, Requirements, and Online Help

1-2

Workstation Hardware and Software Requirements

Table 1-1

 lists the platforms on which the various components of the

Annex software can operate. Note that there can be multiple instances of
NA and Quick2Config Annex on the same Windows NT network.

Table 1-1. Supported Platforms

Chapter 2 of this guide describes installation of the software on the host
server. Chapter 3 provides instructions for installing NA and
Quick2Config Annex on Windows NT Workstations and Windows 95
systems. Chapter 4 covers installation of Quick2Config Annex on
Windows for Workgroups 3.11 and Windows 3.1 platforms.

Requirements for Server Tools

Before you install Remote Annex Server Tools for Windows NT, make
sure you have the following:

•

Windows NT Server version 3.51 or 4.0, configured to support
TCP/IP protocol

•

Administrative privileges on the server

•

At least 10 MB free disk space on the NTFS drive

Platform

Server
Tools

NA
Utility

Quick2Config
Annex

Windows NT Server 3.51 or 4.0

Yes

Yes

Yes

Windows NT Workstation 3.51 or 4.0

Yes

Yes

Windows 95

Yes

Yes

Windows for Workgroups 3.11

Yes

Windows 3.1

Yes

Summary of Contents for 5391



















































































































Reviews:

No comments