Installing Remote Annex Network Software for Windows
Chapter 5 Configuration Examples
5-14
5.
Exit the terminal emulation package and make a connection
using a PPP package that supports an interactive session.
The package negotiates and verifies the connection.
6.
Use Telnet to access the port from another terminal.
7.
Enter the who command.
The modem answers with a display that shows the PPP connection
(
Figure 5-12
).
Figure 5-12. Port Identification Using the who Command
8.
From the Annex prompt, enter the netstat -ip command to
display the ip statistics on the PPP port to see if the connection
has been negotiated properly (
Figure 5-13
).
Figure 5-13. netstat -ip Command and Return
Summary of Contents for 5391
Page 1: ...Part No 166 024 634 Rev A January 1997 Installing Remote Annex Network Software for Windows ...
Page 6: ...Installing Remote Annex Network Software for Windows Contents vi ...
Page 10: ...Installing Remote Annex Network Software for Windows Tables x ...
Page 14: ...Installing Remote Annex Network Software for Windows Preface xiv ...