manualshive.com logo in svg

Bay Networks 5391, Installation Manual, Page: 20 / 114

Share
Download
Bay Networks 5391 Installation Manual Download Page 20

Installing Remote Annex Network Software for Windows

Chapter 1    Overview, Requirements, and Online Help

1-6

Installing NetManage ChameleonNFS IP

You cannot install a NetManage ChameleonNFS IP stack after you install
Quick2Config Annex. If the Setup program does not recognize a
compliant installed IP stack, you must install the NetManage
ChameleonNFS IP stack shipped with Quick2Config Annex during
Quick2Config Annex installation, or exit the installation program to
install a supported package.

If you install the NetManage ChameleonNFS IP stack during
Quick2Config Annex installation, the Custom program automatically
starts during installation. Refer to Chapter 4 and Appendix A for
information about the Custom program.

Adding Other Supported IP Stacks

Install other supported IP stack software (compliant with WinSock 1.1),
such as FTP or FastLink II, before or after you install Quick2Config
Annex.

Windows 95 and Windows NT TCP/IP

You do not have to install the Microsoft TCP/IP stack for Windows 95
or Windows NT before you install Quick2Config Annex. Refer to your
Microsoft documentation to install the Microsoft TCP/IP stack.

Summary of Contents for 5391



















































































































Reviews:

No comments