manualshive.com logo in svg

Bay Networks 5391, Installation Manual, Page: 11 / 114

Share
Download
Bay Networks 5391 Installation Manual Download Page 11

xi

Installing Remote Annex Network Software for Windows

Preface

R

ead this guide if you will use Remote Annex Network Software for

Windows to configure and manage Bay Networks™ Remote Annexes.
This software includes:

•

Remote Annex Server Tools for Windows NT version 2.5

•

NA command line interface version 2.4

•

Quick2Config Annex version 2.3

You should be familiar with:

•

IBM compatible PC terminology and operation

•

Microsoft Windows 3.1, Windows for Workgroups 3.11,
Windows NT 3.51 or 4.0, or Windows 95

•

Networking terminology

Supported Platforms

Remote Annex Network Software for Windows NT runs on a variety of
Microsoft Windows platforms, including Windows NT 3.51 and 4.0, and
Windows 95. Specific platform support and requirements are discussed
in Chapter 1.

The latest release of Remote Annex Network Software may not
support existing devices currently installed on your system. We
recommend that you do NOT accept the default destination directory
name and install the current version if this software to another
location.

Summary of Contents for 5391



















































































































Reviews:

No comments