manualshive.com logo in svg

Bay Networks 5391, Installation Manual, Page: 19 / 114

Share
Download
Bay Networks 5391 Installation Manual Download Page 19

1-5

Chapter 1    Overview, Requirements, and Online Help

Installing Remote Annex Network Software for Windows

Windows 3.1 and Windows for Workgroups 3.11

The following sections describe the restrictions and requirements you
need to be aware of before you install Quick2Config Annex application
software.

Win32s

You need to install Win32s (version 1.30.166.0 or later) with Microsoft
Windows and Windows for Workgroups before you can install
Quick2Config Annex. The Quick2Config Annex install program prompts
you to install Win32s if you do not have it installed on your system.

Mode

To install ChameleonNFS on Microsoft Windows or Windows for
Workgroups, you must run in Enhanced Mode.

Supported IP Stacks

Quick2Config Annex is compatible with the IP stack software packages
listed in

Table 1-3

.

Table 1-3. Supported IP Stacks

Vendor

Package (Compliant with WinSock 1.1)

NetManage, Inc.

ChameleonNFS for Windows, Version 4.6

Novell

LAN WorkPlace for DOS Version 5.0,
as shipped with FastLink™ II Client Version 2.13

FTP Software, Inc.

OnNET Version 2.1

Microsoft

TCP/IP

Summary of Contents for 5391



















































































































Reviews:

No comments