Bay Networks 5391, Installation Manual, Page: 66 / 114

Installing Remote Annex Network Software for Windows
Chapter 4 Installing Quick2Config on Windows 3.1 and Windows for Workgroups 3.11
4-10
Figure 4-9. Modify System Files Dialog Box
4. Click on Yes to modify your system files or No to leave your
system files as they currently exist.
• If you click on Yes, Setup saves the original files in the
\Saved directory under the installation directory with .00x
extensions.
• If you click on No, the required system file changes are
saved to an example directory under the installation
directory (c:\BayNet\Q2CAnnex\Example). Consult this
directory for the changes you need to make after you install
the Quick2Config Annex software. Refer to Appendix B
for the changes.
Quick2Config Annex cannot operate without the
necessary changes to the autoexec.bat and win.ini
files.
The Setup message box opens and displays a gauge showing the
progress of the installation (Figure 4-10).
Figure 4-10. Setup Message Box