Tab.52 PP : Producer Parameters = Generator advanced parameters
ADV parameter
Description of the ADV advanced parameters
EHC–05 factory
setting
ADV \ PP015
Post-operation duration for the CIRCA0 circuit
Can be set from 0 Min 99 Min
3
Tab.53 EP : Entry parameters Parameters = Input advanced parameters
ADV parameter
Description of the ADV advanced parameters
Factory setting
SCB-10
ADV \ EP036
Sets the general configuration of the sensor input Tsyst1
0 =Disabled
1 =DHW tank
2 =DHW tank top
3 =Buffer tank sensor
4 =Buffer Tank top
5 =System (cascade)
0
ADV \ EP037
Sets the general configuration of the sensor input Tsyst2
0 =Disabled
1 =DHW tank
2 =DHW tank top
3 =Buffer tank sensor
4 =Buffer Tank top
5 =System (cascade)
0
Tab.54 NP : Network Parameters = Cascade advanced parameters
ADV parameter
Description of the ADV advanced parameters
Factory setting
SCB-10
ADV \ NP001
Hysterese high for Producer Manager
Can be set from 0.5 °C to 10 °C
3
ADV \ NP002
Hysterese low for Producer Manager
Can be set from 0.5 °C to 10 °C
3
ADV \ NP003
Maximum error gain for Producer Manager
Can be set from 0 °C to 10 °C
10
ADV \ NP004
Proportional Factor for cascade with Temperature algorithm
Can be set from 0 to 10
1
9.2
COUNTERS, TIME PROG, CLOCK menus
Tab.55 List of sub-menus
Sub-menu
Description
CNT
COUNTERS
DHW
Timer programming for the main domestic hot water circuit
CIRCA0
Timer programming for the main heating circuit CIRCA0 (EHC–05 PCB)
CIRCA1
Timer programming for the additional heating circuit according to the installation (SCB-10
PCB)
CIRCB1
Timer programming for the additional heating circuit according to the installation (SCB-10
PCB)
DHW1
Timer programming for the secondary domestic hot water circuit (SCB-10 PCB)
CIRC1
Timer programming for the additional circuit if the optional AD249 is connected
CIRCAUX1
Timer programming for the auxiliary circuit if the optional AD249 is connected
CLK
Setting the clock and the date
9 Settings
7701563 - v02 - 22052018
iHPI
69
