Operation
Instruction handbook
Control system
PCC-04
Document No.: 5.16002.03
41
8
8.2
First start
8.2.1
Software license and activation
Use of the Microsoft
®
operating system
Windows 7
is subject to the licensing limitations
specified by the Microsoft Software License.
Baumüller Nürnberg GmbH is not responsible and cannot be held liable for proper use of
the operating system or any other software installed on the computer.
EULA (End user License Agreement) is on the system partition and can be consulted
there. Please, note that!
Additional details are included in the Microsoft Software License and are also available at
www.microsoft.com
. The Windows product key is on a sticker that is affixed to the
PCC-
04
.
The standard version of
PCC-04
is delivered with activated Windows
®
Embedded Stan-
dard 7.
8.2.2
Firmware and software updates
It's possible that from time to time updates of firmware and software are provided in the
PCC-04
products.
From time to time, Baumüller Nürnberg GmbH may make updates available for the firm-
ware and software utilities. Automatically updates are switched off and may not made by
the user.
8.2.3
Start screen
The
PCC-04
boots after switching on the 24 V
DC
power supply.
First of all the BIOS is displayed then Windows 7 Embedded is started from the system
data storage (CompactFlash
®
card).
BIOS start screen
The BIOS-Start-Screen starts with „American Megatrends Inc." and after a blank line is
continued with „Version 2.16.1242“. These issues are eliminated after the following hard-
ware test:
h
The break key normally is on the top right side of the keyboard. It interrupts a procedure
and the BIOS-version can be checked. Continue with any key.
See Application Manual
PCC-04
for further procedure.
NOTE!
At the first booting up the BIOS starts at first, then Windows and then automatically
Windows is started once more. This can last a few seconds.
Summary of Contents for PCC-04
Page 81: ......
