Touchkit
Instruction handbook
Control system
PCC-04
Document No.: 5.16002.03
Baumüller Nürnberg GmbH
48
8.3
Figure 14:
9 Points Calibration screen
Touch and hold each point until the point stops blinking. If a touch point is not touched
within 30 seconds, the utility is closed, returning to the “Touchkit… Tools” dialog box. A
progress bar at the bottom of the screen indicates the time remaining.
Draw Test
To verify the calibration and other settings of the touch screen, click the “Draw Test” key.
This utility opens a scratch pad for testing purposes. Touch the screen and perform typi-
cal operations to evaluate the touch screen calibration and settings.
Summary of Contents for PCC-04
Page 81: ......
