Baumuller PCC-04 Instruction Handbook Manual Download Page 74

Page: 74 / 82

EC - Declaration of Conformity

Doc.-No:

5.16016.00



Date:

21.06.2016

according to EMC Directive 2014/30/EU

The manufacturer:

Baumüller Nürnberg GmbH



Ostendstraße 80-90



90482 Nürnberg, Germany

declares that the product:

Designation:

Industrial PC PCC-04



Type:

BMP-04



Manufactured since:

01.07.2016

is developed, designed and manufactured in accordance with the EMC Directive 2014/30/EU.

Applied harmonized standards:

The products must be installed correctly and all notes and safety notes of the referring instruction handbook must be com-
plied with, to guarantee the compliance to the guidelines.

Nürnberg / 21.06.2016

Place / Date

The content of the Declaration of Conformity is subject to change. The current version can be obtained on request.

Standard

Title

EN 55022: 2011-12

Information technology equipment - Radio disturbance characteristics - Limits and methods of mea-
surement

EN 55024: 2016-05

Information technology equipment - Immunity characteristics - Limits and methods of measurement

EN 61000-6-2:2016-05

Immunity standard for industrial environments

Instruction handbook

Control system

PCC-04

Document No.: 5.16002.03

Baumüller Nürnberg GmbH

of 80

Summary of Contents for PCC-04



















































































Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands

Baumuller PCC-04, Instruction Handbook Manual

Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands