Baumuller PCC-04 Instruction Handbook Manual Download Page 42

Page: 42 / 82

Touchkit

Instruction handbook

Control system

PCC-04

Document No.: 5.16002.03

Baumüller Nürnberg GmbH

of 80

8.3

Touchkit

PCC-04

computers equipped with a display include Touchkit, a software utility to config-

ure the operation of the touch screen. This utility provides multiple touch screen calibra-
tion methods as well as modes for pointer (mouse) operation and audio touch
acknowledgment.

To start Touchkit utility do one of the following:

Double-click the “eGalaxTouch” icon ((see

Touchkit (eGalaxTouch) icon

–

on page

52).

Click the “Start” key, navigate to the “All Programs, eGalaxTouch” folder and then
click the “Configure Utility” icon

The dialog „Touchkit USB Controller ... general“ is opened. All installed Touchscreen
controller are displayed.

If multiple controllers are installed, click the icon of the controller to be modified before
clicking the required tab.

NOTE!

The default controller for the

PCC-04

USB Controller

Summary of Contents for PCC-04



















































































Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands

Baumuller PCC-04, Instruction Handbook Manual

Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands