Baumuller PCC-04 Instruction Handbook Manual Download Page 55

Page: 55 / 82

Operation

Instruction handbook

Control system

PCC-04

Document No.: 5.16002.03

of 80

8.4

Intel

Graphics Control Panel user interface

The

PCC-04

uses the Intel

Graphics Media Accelerator video driver and has a variety

of customization features available, including multiple displays.

8.4.1

User interface

To access the video driver controls:

right-click the desktop, move the pointer over “Graphics Options…” and navigate to the
desired option. This provides a quick path to the required setting..

Figure 21:

Graphic Media Accelerator direct select options

Click on the symbol Intel video driver in the information range (system tray) and then
on the menu item "Graphics Properties"

Figure 22:

Graphics Control Panel main user interface screen

Summary of Contents for PCC-04



















































































Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands

Baumuller PCC-04, Instruction Handbook Manual

Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands