Baumuller BUS 6 VC, Manual

Page: 19 / 110

Installation
V-Controller (BUS 6 VC)
17
Baumüller Nürnberg Electronic GmbH & Co. KG
5.03047.01
5 I
NSTALLATION
5.1 Danger Information
WARNING
You are responsible for mounting the controller in accordance with appropriate safety regulations (e.g.
DIN, VDE); equally, you must ensure that all other relevant national and local regulations are met with
regard to cable ratings and protection, grounding, disconnectors, overcurrent protection, etc.
The power converter's power cables are energized!
During operation, the principles on which the power converter and the motor work lead to leakage cur-
rents to earth that are dissipated via the specified protective earths and may result in a current-opera-
ted e.l.c.b. on the input side blowing prematurely.
Speed monitoring systems in the equipment must not just be complemented by a stand-alone moni-
toring system on the motor in the case of speed-critical drives. You can implement this control of the
RPM speed, which is independent of the controller, by means of inductive, optical or torque-dependent
encoders. Refer to the appropriate motor's operating and maintenance instructions.
Be particularly careful before touching the drive shaft directly or indirectly with your hands. This is only
allowed when the system is deenergized and the drive is stationary.
Safety devices must never be deactivated.
According to applicable regulations (EN 60204 Part 1 and VDE 0113 Part 1), stopping the drive using
the enable inputs of the control electronics does not, on its own, represent a safe stop condition. A
disturbance in the power converter's control electronics can lead to accidental starting of the motor.