Baumuller BUS 6 VC, Manual

Page: 93 / 110

Maintenance
V-Controller (BUS 6 VC)
91
Baumüller Nürnberg Electronic GmbH & Co. KG
5.03047.01
8 M
AINTENANCE
8.1 Maintenance Information
The units supplied are maintenance-free.
Prohibition of unauthorized modifications
For safety reasons, unauthorized additions or modifications to the drive are not allowed.
WARNING
The equipment carries a dangerously high voltage and has dangerous rotating parts (fans). Ignoring
the safety and warning information may result in death, severe personal injury or damage to property.
You may only carry out maintenance when the unit is deenergized.
Do not begin work on the power stage and the intermediate circuit until you have made sure that the
unit is not carrying potential or a voltage (remanent charge).
When dismounting safety devices during commissioning, repair and maintenance work, you must en-
sure that the machine is taken out of commission exactly as specified. You must remount and check
safety equipment immediately after completing commissioning, repair and maintenance work.
After carrying out any work involving intervention in the machine – regardless of whether this involves
the motor, the actual value acquisition or the power converter – the owner must carry out acceptance
testing and document it chronologically in the machine log. Failure to do this may result in the owner
being faced with consequences relating to liability legislation.