Baumuller b maXX 5000 BM5800 Series, Instruction Handbook Manual

Page: 84 / 176

Requirements for the motor temperature sensors
Instruction handbook b maXX 5800
Document No. 5.16027.04 Baumüller Nürnberg GmbH
84
of 174
7.9
Locking torque of the fixing screw:
7.9 Requirements for the motor temperature sensors
Type Additional requirements: Isolation
KTY84 - SELV/PELV
PT1000 - SELV/PELV
MSKL
1)
(PTC) R = 1 k

at T
Schutz
, I
max
< 2 mA SELV/PELV
To protect the motor against impermissible overheating, a motor temperature sensor can
be connected to the
b maXX device. The device switches off of the motor when a settable
threshold temperature has been exceeded.
1)
Motor protection thermistor (PTC) as per DIN 44080-082
Axis module 1 / 2 / 3
BM5807- S G
Locking torque
- 22 XXXX-,
- 23 XXXX-,
- 24 XXXX-,
- 25 XXXX-,
- 26 XXXX-,
- 27 XXXX-,
- 28 XXXX-
0.8 Nm
cable diameter 5 - 20 mm
shielding clamp width 24 mm
- 31 XXXX-,
- 32 XXXX-,
- 33 XXXX-
1 Nm
cable diameter 5 - 28 mm
shielding clamp width 31 mm
NOTE!
The motor temperature sensor should be installed in such a manner that „electrically
protective separation“ is ensured. The motor temperature sensors integrated into
Baumüller motors meet these requirements. If third-party motors are connected, the
operating company must ensure that the temperature sensors used in the motor of a
third-party manufacturer motor comply with the „electrically protective separation“
function.