Baumuller b maXX 5000 BM5800 Series, Instruction Handbook Manual

Page: 52 / 176

UL notes
Instruction handbook b maXX 5800
Document No. 5.16027.04 Baumüller Nürnberg GmbH
52
of 174
4.3
4.3 UL notes
The notes below must be observed in case you consider UL 508 C.
Z Required environmental conditions – on page 31
n
Note the maximum surrounding air temperature.
n
Use in a pollution degree 2 environment only.
Z Design – on page 45
n
Multi axis controller are allowed to be used only in combination with mains
rectifiers (BM5031, BM5032, BM5043, BM5044, BM5174).
Z Installation procedure – on page 85
n
Internal overload protection operates after exceeding 200 % of the motor full
load.
Z Connections BM5800 – from page 89
n
Position of wiring terminals to indicate the proper connections for the power
supply, load, control circuit, and similar devices refer to
Z Page 89 –
.
Connections Z Page 91 – and Z Page 92 –
n
Note tightening torque values marked for field terminals.
Z Requirements for the connection cables – on page 75
n
Use 60°/75°copper wires only.
Z Requirements for the motor temperature sensors – on page 84
n
Drives do not provide motor overtemperature sensing.
Z Mounting of the DC link bar – from page 69 and Z DC link bar – on page 154
n
Proper installation of the DC link bar, refer to
Z Mounting of the DC link bar – from
page 69
and proper DC link bar refer to
Z DC link bar – on page 154.