Baudouin 12M26 Series, Operation And Maintenance Manual

Page: 40 / 83

O&M Manual for PowerKit
M26 Series Diesel Engine
40
4.3 Operation of the PowerKit Engine

After the start of diesel engine, idle the engine for 3min, and then increase the speed to
1000r/min to 1200r/min with some load. Only when the coolant temperature is above
60ºC and the oil temperature is above 51ºC, can the engine run with full load. The load
and speed should be increased gradually.

In the first running in period of 60h, the diesel engine should work with load less than the
moderate load.

Parameters and checking locations to be observed always during operation are as below:
Oil pressure of main oil passage
≥
200 kPa (idling working conditions), (450~650) kPa
(rated working conditions).

The oil temperature in main oil passage: (85~105) ºC.

Coolant outlet temperature: (75~95) ºC.

Exhaust temperature after turbine
≤
550 ºC.

Intake temperature after intercooler: (50~60) ºC.

Check the exhaust color, to estimate
the performance of the injector and the
load of the engine. In the case of seri-
ous black or white smoke, stop and
check the engine.

Check the diesel engine for presence of
water, gas, and oil leakages.
Figure 4.3-Smoke
Users should immediately stop the genset,
check and troubleshooting if there is ab-
normal phenomenon!