Barco UDM Series, User Manual

Page: 70 / 190

R5911443 /02 UDM 70
Image 7-24: P7 Realcolor menu
2. Select the desired Mode . Choose one of the following custom options:
• Custom RGB : 3 – point color configuration.
In RGB mode, the C, M and Y coordinates will be calculated automatically based on the R, G and B
coordinates.
• Custom RGBCMY : 6 – point color configuration (both RGB and CMY).
In RGBCMY mode, each color can be given a specific coordinate within the measured color triangle.
• Custom WHITE : Configure only the White temperature.
3. Define the coordinates for each available color.
Click on a coordinate value and select the current value. Enter the desired value with the numeric keys.
Note: You can only pick coordinates within the measured color triangle.
4. For Custom White , click on White point and choose one of the following:
• Coordinates : Configure the white point via specific coordinates.
The white point is specified using an x, y coordinate in the CIE 1931 Chart.
• Temperature : Configure the white point via a color temperature slider.
The white point is specified on a Kelvin scale between 3200K and 13000K tracking along the black body
curve.
You can reset all coordinates to the default values (to native) by selecting Reset modes to native.
Press
OK button to reset.
How to choose one of the P7 presets
1. In the main menu, select Image → Advanced → P7 Realcolor .
Image 7-25: Advanced menu — P7 Realcolor
The P7 menu is displayed.
GUI – Image