Barco UDM Series, User Manual

Page: 29 / 190

R5911443 /02 UDM 29
P
P
Image 2-14
The Test pattern menu opens on the LCD display.
2. Use the arrow keys to select the desired test pattern.
2.4 Switching to standby
How to switch to standby
1. Press and hold the Power on/off button for 3 seconds on the local keypad, or press the Power Off button on
the remote control.
The projector goes to standby mode. The after-cooling cycle will start (about 30 seconds). During this period
the Power on/off button will blink. Once the after-cooling cycle has ended, the projector will be in standby
mode and the Power on/off button will be lit WHITE.
3 s 30 s
Image 2-15
2.5 Power off projector
CAUTION: This procedure assumes the projector is in standby mode.
How to power off
1. Switch off the projector with the mains switch. '0' must be pressed.
Getting Started