Barco UDM Series, User Manual

Page: 134 / 190

R5911443 /02 UDM 134
Tip: Press Reset to return all values to the factory settings.
5. Repeat all steps until the desired alignment is achieved.
10.16 Advanced Settings
About the Advanced Settings menu
The Advanced Settings menu is hidden by default for the regular user. you can only make this visible after
entering a
Service code with the remote control.
Image 10-42: Maintenance menu, with the Advanced Settings Hidden
If you have a service code, navigate to the Maintenance menu. Enter the code with the numeric keys. If
entered correctly, the Advanced Settings option will become visible.
It doesn ’ t matter what else you do or type with the remote. As long as you type in the service code in
the correct order, the Advanced Settings option will become visible.
Image 10-43: Maintenance menu, Advanced Settings
The Advanced Settings menu item will remain visible until you leave the Maintenance menu.
10.16.1 Advanced Settings – Color
CAUTION: The native colors have been measured and set during factory production. Do not
change them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a
P7 calibration ,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
How to adjust the P7 native settings
1. In the main menu, navigate to System Settings → Maintenance → Advanced Settings .
GUI – System Settings