Manual # 26-0208100-00 / Revision E
ScreenSHAPER – Video Mapping System 37
Command:
WARP n
Description:
Enable/Disable the warp function. If the warp function is set to ON, the warp map used is set by
the MAP command. If the warp function is set to KEYSTONE*, the warp mapused is set by the
KEY command. This command is only recognized in the WARP Operation Mode.
*Note:
The keystone function currently only supports these input-output settings:
SVGA, XGA and SXGA inputs to SXGA output
SVGA, XGA and SXGA inputs to XGA output
SVGA and XGA inputs to SVGA output
Parameters:
n
[0|1|2], [OFF|ON|Keystone]
Query:
WARP ?
Returns the warp status
=n
Example:
WARP 1
(Enable the warping function for user defined warp.)
