Barco ScreenShaper VMS-100 Installation And Operator'S Manual Download Page 19 | Manualshive

Page: 19 / 52

background image

Manual # 26-0208100-00 / Revision E

ScreenSHAPER – Video Mapping System 11

System Status Display

The System Status Display is displayed whenever a configuration menu is not being displayed. This four-line display
contains “SYSTEM STATUS” on the first line indicating that this is the system status display screen. The second line
contains the video input format and the input type (ANALOG or DIGITAL). The third line contains the output resolution
and frame rate. Depending on the mode of operation, the last line contains the current operation status. The status
information could be the Warping Mode or the Rotation Setting. “TEST” is displayed if a test pattern is being
generated by the internal test pattern generator.

Warp Mode:

Rotation

Mode:

Menu Control

The adjustment knob as well as the SEL and ESC keys is used to navigate through a series of menus displayed on
the VFD display. The menus are used to enter setup parameters. Once setup parameters are entered, they are
stored in non-volatile memory for future use using the system save menu item. Pressing one of the four hot keys will
call up the corresponding menu on the VFD.

The user can scroll through the menu items by turning the ADJUST control knob. A pointer (>) at the left of a menu
item indicates the current position of the scroll bar. When the desired menu item is reached, the user presses the
SEL key to select that menu item. The sub-menu pointer (>>) at the right of a menu item indicates that a sub-menu
will be displayed if that menu item is selected. The pointer at the left hand side of the display changes to a pound sign
(#) indicating that a parameter is selected. After a parameter has been selected, the user can modify the associated
parameter values by turning the ADJUST control knob. The operator can accept the changes with SEL or press ESC
to exit the current menu item without modifying current settings.

In this section, the Factory Reset values are displayed in the menu diagram.

SYSTEM

STATUS

INPUT: SXGA ANALOG
OUTPUT: SXGA 60HZ
WARP OFF LIVE

SYSTEM

STATUS

INPUT: SXGA ANALOG
OUTPUT: SXGA 60HZ
ROTATION 0 LIVE

«
...
17
18
19
20
21
...
»

Summary of Contents for ScreenShaper VMS-100





















































Reviews:

No comments

Related manuals for ScreenShaper VMS-100

mydlink DSP-W110

Brand: D-Link Pages: 13

Brand: D-Link Pages: 44

Brand: Samsung Pages: 15

Brand: Wallenstein Pages: 48

Brand: Mamiya Pages: 10

Brand: MAM Pages: 4

Brand: NA-DE Pages: 2

Brand: N-Com Pages: 2

Brand: N-Com Pages: 64

Brand: Oki Pages: 4

AERASGARD RCO2-W

Brand: S+S Regeltechnik Pages: 32

Brand: Valcom Pages: 1

Brand: Valcom Pages: 13

Brand: Yoshimura Pages: 7

Brand: Magnus Pages: 6

GTM 10 - TMC Module

Brand: Garmin Pages: 1

Brand: AOR Pages: 29

Brand: EVA Logik Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands