![background image](http://html.mh-extra.com/html/barco/screenshaper-vms-100/screenshaper-vms-100_installation-and-operators-manual_473383010.webp)
2
ScreenSHAPER – Video Mapping System
Manual # 26-0208100-00 / Revision E
Introduction
About the ScreenSHAPER
The ScreenSHAPER accepts analog RGB video or digital DVI video from one video source and re-maps the image
for display on a non-flat or off-axis surface using a projector. The output video is generated in analog and DVI format.
An external computer is required to generate the “warp map” used to correct for the non-flat or off-axis surface.
Typical Operation
The ScreenSHAPER can be used whenever it is necessary to project images from a projector to a non-flat or off-axis
surface. Typical applications include advertising displays, flight simulators, keystone correction, and home theater.
Features
•
Accepts RGB and DVI video input with resolutions up to 1280x1024, non-interlaced
•
Automatically locks to the input video and processes it in real-time
•
Processes the entire input image or a user-defined “area of interest”
•
Supports independent X,Y scaling for aspect ratio corrections
•
User-selectable output formats: VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024),
1280x720, 1280x768, 1280x960
•
Supports analog RGB and digital DVI concurrent video output
•
Simple, intuitive front panel controls support quick setup
•
RS-232 serial interface for remote control of all functions with Graphical User Interface software
•
Rugged 19” rack-mount chassis
•
Non-volatile storage for configuration data
•
Built-in test pattern generator
•
Backed by a full 3-year parts and labor warranty