![background image](http://html.mh-extra.com/html/barco/screenshaper-vms-100/screenshaper-vms-100_installation-and-operators-manual_473383041.webp)
Manual # 26-0208100-00 / Revision E
ScreenSHAPER – Video Mapping System 33
Command:
INFO
Description:
System Information Command. For internal use only
Parameters: NONE
Example: NONE
Command:
INFO2
Description:
System Information Command. For internal use only
Parameters: NONE
Example: NONE
Command:
IRSP
n n
Description:
Adjust the input active window.
Parameters:
n
Edge to adjust, L|R|T|B, Left|Right|Top|Bottom
n
Offset, [-999..999].
Example:
IRSP l 2
(Adjust the left edge 2 pixels to the right.)
IRSP B -2
(Adjust the bottom edge 2 lines up.)
Command:
ISYNC n
Description:
Adjusts the Input Sync selection of the current source.
Parameters:
n
-
Mode; [0|1|2|3], SOG|COMP|H/V|AUTO
Query:
ISYNC?
Returns the Input Sync Mode of the current source in the format:
=n
Example:
ISYNC 0 (Sets Scaler to expect SOG on the input channel.)
Command:
KEY n n
Description:
Load a new keystone warp map from flash into the coefficient dual port ram of the warper chip.
This command is only recognized in the WARP Operation Mode.
Parameters:
n
-
V Index of keystone, [0-10]
n
-
H Index of keystone, [-8-8]
Query:
KEY ?
Returns the currently selected keystone indexes.
= n n
Example:
KEY 1 1 (The keystone warp map (1,1) is loaded into the DPR.)
Command:
LNW
Description:
Load a new user defined warp map from flash into the coefficient dual port ram of the warper chip.
This command is only recognized in the WARP Operation Mode.
Parameters: None
Query:
None
Example:
LNW
(The user defined warp map is loaded into the DPR.)
Command:
LOADR
Description:
Places unit into loader mode. This mode is used to perform field upgrades
Parameters: None.