34
ScreenSHAPER – Video Mapping System
Manual # 26-0208100-00 / Revision E
Command:
MAP n
Description:
Index a user-defined warp map. The warp map has to be loaded prior to turning the warping
function ON. It is required that the loaded warp map was generated for the current input-output
resolution. This command is only recognized in the WARP Operation Mode.
Parameters:
n
-
Index of the user-defined warp map, [0-8]
Query:
MAP ?
Returns the currently selected user-defined warp map.
= n
Example:
KEY 2 (The user-defined warp map [2] is loaded.)
Command:
OCRECF n
Description:
Select the Output Resolution
Parameters:
n
-
Output Resolution
0 = VGA, 640x480*
1 = SVGA, 800x600
2 = XGA, 1024x768
3 = SXGA, 1280x1024
4 = 1280x720
5 = 1280x768
6 = 1280x960
*VGA is not supported if the input format is 1280x1024
Query:
OCRECF ?
Returns the Output Resolution in the format:
=n
Example:
OCRECF 2
(Select output format to be XGA.)
Command:
OFRATE n
Description:
Adjusts the Output Frame Rate.
Parameters:
n
-
frame rate; [0|1|2|3], 50Hz|60Hz|75Hz|59.94Hz
Query:
OFRATE ?
Returns the Output Frame Rate in the format:
=n
Example:
OFRATE 1
(Sets the output frame rate to 60Hz.)
Command:
OP n
Description:
Set the operation mode for ScreenShaper products. The warping functions are only available when
operating in WARP mode and the rotation functions are only available when operating in ROTATE mode.
Parameters:
n
-
operation mode, [0|1] WARP|ROTATE
Query:
OP ?
Returns the operation mode:
=n
Example:
OP 1
(Set the ScreenShaper unit to operation in ROTATE mode.)
OP 0
(Set the ScreenShaper unit to operation in WARP mode.)
