![background image](http://html.mh-extra.com/html/barco/screenshaper-vms-100/screenshaper-vms-100_installation-and-operators-manual_473383024.webp)
16
ScreenSHAPER – Video Mapping System
Manual # 26-0208100-00 / Revision E
Output Setup Menu
The OUTPUT SETUP Menu allows the user to control output image configurations. Based on the Operation Mode,
either the Warp Output Setup or the Rotation Output Setup menu is displayed when the
OUT ADJ
menu key is
pressed on the front panel.
Warp Mode:
Rotation Mode:
Save Settings
This menu selection is used to save changes made in the Output Setup menu to non-volatile memory. If this menu
item is not selected, changes will not be saved and the previous settings will be restored the next time the system is
powered on.
Warping
The warping function can be set to OFF/ON/KEYSTONE*. The default is set to OFF.
*The keystone function currently only supports these input-output settings:
SVGA, XGA and SXGA inputs to SXGA output
SVGA, XGA and SXGA inputs to XGA output
SVGA and XGA inputs to SVGA output
Warp Map Index
If the warping function is set to ON, the image is processed according to the warp map indexed by this parameter.
There are 9 warp maps that can be loaded and recalled by setting the Warp Map Index. The warp map has to be
loaded prior to turning the warping function ON. It is required that the loaded warp map was generated for the current
input-output resolution.
V Keystone
If the warping function is set to KEYSTONE, this menu selection set the vertical index of the keystone warp. The
default is set to 0.
ROT OUTPUT SETUP
SAVE SETTINGS ^
ROTATION 0
FLIP OFF
FREEZE
DIS
FORMAT SXGA 1280x1024
FRAME RATE 60Hz
SYNC SELECT +H+V
DISPLAY AREA >>
GAMMA CORRECTION >>
TIMING LOCK DIS
RASTER BOX OFF
WARP OUTPUT SETUP
SAVE SETTINGS ^
WARPING OFF
WARP MAP INDEX
0
V
KEYSTONE
0
H
KEYSTONE
0
FREEZE
DIS
FORMAT SXGA 1280x1024
FRAME RATE 60Hz
SYNC SELECT +H+V
GAMMA CORRECTION >>
TIMING LOCK DIS
RASTER BOX OFF