1. Safety Instructions
Shock Hazard
The lightning flash with an arrowhead within a triangle is intended to tell the user that
parts inside this product are risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell the user that important
operating and/or servicing instructions are included in the technical documentation fo
this equipment.
Image 1-1
1.1.2
Electrical Safety
Ratings & Grounding
•
These products should be operated from an AC power source. Check if the mains voltage and the load matches the product
electrical ratings.
•
A grounded three-core power cable has to be used. Connect the power cord by inserting it in a grounded electrical outlet,
making sure that the cord is properly grounded.
•
If you are unable to install the AC Requirements, contact your electrician. Do not defeat the purpose of the grounding.
•
Always connect this appliance to an electrically grounded outlet. Never use a ground bypass (cheater) adapter.
General
•
Always plug power cord into appliance before plugging into outlet.
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord.
•
Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Never yank cord to pull plug
from outlet. Grasp plug and pull to disconnect.
•
Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged - until it has been examined
by a qualified serviceman.
•
Position the cord so that it will not be tripped over, pulled, or contact hot surfaces.
•
If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cord rated
for less amperage than the appliance may overheat.
•
Let appliance cool completely before storing. Remove cord from appliance when storing.
•
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out
parts that could result in a risk of fire or electrical shock.
•
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have it
checked by qualified service personnel before resuming operations.
•
Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet. This will prevent damage to the projector due to lightning and AC power-line
surges.
1.1.3
Protection on Servicing
Attempts to alter the factory-set internal controls or to change other control settings not specially discussed
in this manual can lead to permanent damage to the Projection Unit and cancellation of the warranty.
Servicing
Do not attempt to service the installed modules yourself, as opening or removing covers may expose you to dangerous voltage
potential and risk of electric shock! Refer all projector service to a qualified BARCO service center.
Call for service in the following conditions :
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the modules.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of the other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal operation;
•
If the product has been dropped or the cabinet has been damaged;
•
If the product exhibits a distinct change in performance, indicating a need for service.
6
R5976468 CINE VERSUM SYSTEM 03112003
Summary of Contents for R9841020 Cine VERSUM Master
