Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 12 / 161

1. Safety Instructions
Nearby equipment
If air conditioning ducts or lamps, etc. are located near the installation site, the attendant dust, extreme temperatures, humidity, and
condensation may become sources of trouble. Please take sufficient steps to avoid this.
Safety locations
Do not install the unit where it may be easily touched or leaned against. Avoid locations subject to high vibrations or severe impacts.
Lightning conditions
• Consider existing lightning and sunlight angles when creating the installation layout. Extremely bright lightning can reduce the
visibility and the quality of the displayed image.
• In extremely bright surroundings, adjusting screen intensity may not result in perceptibly brightener images. Keep in mind that
extreme intensity settings can reduce system service life.
Installation partially outdoors
The unit is designed for indoor use, and is not suited for open-air use. Installation in locations that are even partially exposed to the
elements may lead to malfunctions or breakdown caused by any of the following:
• Water and dust
• Changes in temperature and humidity
• Salt-bearing wind
1.2.1.2 On product specifications
Temperature and humidity conditions
• The installation site should meet the following conditions:
- Operating temperature: 0 to 40 °C (largely depending on installation conditions)
- Operating humidity: 20 to 80%
- Storage temperature: –20 to 60°C
- Storage humidity: 20 to 90%
- Operating atmospheric pressure: 800 to 1100kPa
- Storage atmospheric pressure: 600 to 1500 kPa
• We recommend against installing electronic products such as this unit in locations subject to high humidity. If the unit is to be
installed in a location subject to relatively high humidity, observe the following:
- Failure to install the unit in unacceptable ways may result in non-warranty damages.
- Make sure the unit is grounded.
- Do not allow water or other liquid to enter the unit.
Prevent condensation
One of the main sources of problems during winter is ’condensation’. Rapid temperature fluctuations can deposit water vapor inside
the unit or on the screen, degrading performance. If condensation occurs, turn the unit off and leave it off for an hour or so. It is also
good practice to increase the room temperature gradually.
Burn in of the picture
Avoid static pictures on the plasma screen for more than 15 minutes in order to prevent burn in of the picture on the plasma screen.
Effective remote control distance
This display emits weak infrared radiation. If other products controlled with infrared remote controls are placed nearby, remote
control function may be affected. In such case, move them further away from the display or contact BARCO authorized dealer or
assistance.
Depending on installation conditions, the range of the unit’s own remote control may be reduced by infrared radiation emitted by the
screen. The screen’s infrared intensity will vary, depending on the image displayed.
1.2.2 Cine VERSUM 80 and Cine VERSUM 120
1.2.2.1 Heat and Fire Hazards
Warning Risk of Fire
Warning Risk of Fire: Do Not Place Flammable or Combustible Materials Near Projector !
BARCO large screen projection products are designed and manufactured to meet the most stringent safety regulations. This pro-
jector radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and safe.
8 R5976468 CINE VERSUM SYSTEM 03112003