Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 31 / 161

5. Location of Controls
5. LOCATION OF CONTROLS
Overview
• On Cine VERSUM Master
• On Cine VERSUM 50
• On Cine VERSUM 80
• Cine VERSUM 120
• On InfraRed Remote Control
5.1 On Cine VERSUM Master
Front View
The front side of the Cine VERSUM Master is provided with the following controls:
Image 5-1
Front side Cine VERSUM Master
Controls function description
Ref.
Function Description
1 Infra Red Reception LED indicator Lights up when a valid IR signal from the Remote Control has been
captured.
2
Infra Red Receiver Infra Red reception diode for the IR signals from the IR transmitter
3 Standby LED Blinks when the Cine VERSUM Master has been powered down to
Standby or Economic Standby mode.
4 Push key main power switch key pressed, switches the Cine VERSUM Master in:
• the ’powered up’ mode if the latest Master status was ’Operation
mode’.
• the ’standby’ mode if the latest Master status was ’standby’ or
’Economic standby’ mode.
5 Blue Dot Matrix display with white LED
backlighting This display indicates the status of the Cine VERSUM Master and also
the items when navigating through the different menu’s.
6 Start up and Random access adjustment
mode selection knob All source parameters and picture tuning are setup in the adjustment
mode.
Table 5-1
5.2 On Cine VERSUM 50
Rear and Front view
The only hardware control on the Cine VERSUM 50 is the Main Power Switch (1), located at the backside of the screen itself. This
switch puts the Screen in the OFF, Standby or Operation mode fixed by the previous status. From the Standby position or the
operation mode, the Cine VERSUM 50 is controlled by the Cine VERSUM Master.
R5976468 CINE VERSUM SYSTEM 03112003 27