Barco R9841020 Cine VERSUM Master, Installation Manual

Page: 51 / 161

7. Connections
AC Power Specifications
AC Power Voltage Auto Range 100 – 240V
AC Power Current 3 A – 1.5 A/ 50 – 60 Hz
Main Fuse Main Power Supply: T4A H 250V
Power Consumption
Normal operation mode 270 W
Standby mode 8 W
7.1.4 Power Connection Cine VERSUM 120
AC Power Cord connection
Use the supplied power cord to connect the Cine VERSUM 120 to the wall outlet. First, remove the back cover (1) (turn the quarter
turn fastener a quarter turn counterclockwise to unlock cover) and the power input cover (2) to allow the power plug insertion. Then,
plug the female power connector into the male connector at the rear of the unit. Make sure that the power plug is firmly inserted into
the AC socket and the power cable routed from the bottom side.
A
1
2
Image 7-8
Projector covers removal
A Quarter turn fastener
1 Rear cover
2 Power input cover
A
B
Image 7-9
Power connection
A Right angle power socket
B Power cable routing
AC Power Specifications
AC Power Voltage Auto Range 90 – 240V
AC Power Current 7.0 A – 2.9 A/ 50 – 60 Hz
Main Fuse
Main Power Supply: T15A H 250V
Power Consumption
Normal operation mode 650 W (Dual lamp) -355 W (Single lamp)
Standby mode 14 W
7.1.5 Power Connection Cine VERSUM 50
AC Power Cord connection
Use the supplied power cord to connect the Cine VERSUM 50 to the wall outlet. Plug the female power connector into the male
connector at the rear of the unit. Make sure that the power cord is firmly inserted into the AC socket.
R5976468 CINE VERSUM SYSTEM 03112003 47